Here are the step-by-step instructions for installing the Mini Wall vending machine as demonstrated in the video:
Phase 1: Pre-Installation (Attaching the Machine Brackets)
Before mounting the machine to the wall, you must attach the mounting brackets to the machine itself.
Locate the Screw Holes: Find the pre-drilled holes on the top and bottom of the machine's rear casing.
Attach Top Brackets: Place a bracket over the top screw hole. Insert a screw through the bracket and into the machine from the outside in.
Attach Bottom Brackets: Repeat this process for the holes located at the bottom rear of the machine.
Phase 2: Wall Mounting
Once the brackets are secured to the machine, you are ready to mount it to your desired surface.
Position the Machine: Have one person lift the machine to the desired height against the wall or mounting surface.
Anchor the Top: While the machine is held in place, a second person should anchor the top brackets to the wall using appropriate screws/fasteners.
Anchor the Bottom: Secure the bottom brackets to the wall to ensure the machine is level and stable.
Final Check: Ensure all four points (two top, two bottom) are firmly anchored before releasing the weight of the machine.